pump up your life

JOB DESCRIPTIONS:

121. SENIOR BRICKLAYER

Department : SMP
Job Location : Abu Dhabi
No. Of Vacancy : 4
Salary : US$ 3158 – 3355 / month


The desired candidate must have a minimum of 5 years experience in the following:

1. Linings EAF, Linings Ladle, Linings Tundish, Linings DR furnace
2. Applies fettling/repairing for EAF
3. Leads operating team
4. Uses lance and cutting torch
5. Knowledge about Meltshop safety
6. Repairs ladle flow control system, Repairs Vesuvius ladle flow control system

Diploma/degree in science is a must.
Scheduled Deployment Date: August-September 2010

122. SENIOR CASTING OPERATOR



Department : SMP
Job Location : Abu Dhabi
No. Of Vacancy : 4
Salary : US$ 3158 – 3355 / month


The desired candidate must have a minimum of 5 years experience in the following:

1. Working on a Continuous Casting Plant
2. Production of Billets/Blooms or Beam Blanks
3. Experience of Casting and Discharge activities
4. Supervision of other operators
5. Health & Safety and Environmental responsibilities
6. Knowledge of Engineering of Casting machine

Diploma/degree in science is a must.
Scheduled Deployment Date: April-June 2010

123. SENIOR CRANE OPERATOR


Department : SMP
Job Location : Abu Dhabi
No. Of Vacancy : 4
Salary : US$ 3158 – 3355 / month


The desired candidate must have a minimum of 5 years experience in the following:

1. Works in Steel Plant
2. Drive Over-head crane capcity more than 70 tons, Drive Over-head crane in EAF
3. Drive Over-head crane in CCM, Drive Over-head Crane in RM
4. Leads Crane operators team
5. Applies crane repair activities
6. Knowledge about Meltshop safety, Knowledge about Manning Plan

Diploma/degree in science is a must.
Scheduled Deployment Date: August 2010

124. SENIOR LADLE REPAIRMAN

Department : SMP
Job Location : Abu Dhabi
No. Of Vacancy : 4
Salary : US$ 3158 – 3355 / month



The desired candidate must have a minimum of 5 years experience in the following:

1. Works in Steel Making Plant
2. Installs ladle porous plug
3. Linings of ladle refractory
4. Repairs ladle flow control system
5. Repairs Vesuvius ladle flow control system
6. Knowledge about Meltshop safety
7. Supervision of other operators
8. Experience of EAF/LF/CCM plant

Diploma/degree in science is a must.
Scheduled Deployment Date: August-September 2010

125. SENIOR MELTER


Department : SMP
Job Location : Abu Dhabi
No. Of Vacancy : 4
Salary : US$ 3158 – 3355 / month


The desired candidate must have a minimum of 5 years experience in the following:

1. Operates with EAF-LF-CCM route, Operates UHP furnace with minimum 80 ton capacity
2. Operates EAF with DRI/Scrap
3. Produces low/high carbon steel
4. Applies fetling/repairing for EAF
5. Leads operating team
6. Knowledge about Meltshop safety
7. Uses cutting torch and welding
8. Operates oxygen - carbon module


Diploma/degree in science is a must.
Scheduled Deployment Date: April-June 2010

126. SENIOR MOULD/SEGMENT REPAIRMAN

Department : SMP
Job Location : Abu Dhabi
No. Of Vacancy : 2
Salary : US$ 3158 – 3355 / month

The desired candidate must have a minimum of 5 years experience in the following:

1. Experience of assembly/repairs of mechanical equipment
2. Working in a Continuous Casting Plant
3. Experience of ladle slidegate mechanism maintenance
4. Experience of tubular casting mould assembling, Experience of plate casting mould assembling

Diploma/degree in science is a must.
Scheduled Deployment Date: October 2010

127. CHEMICAL LABORATORY SUPERVISOR

Department : Technical Services
Job Location : Abu Dhabi
No. Of Vacancy : 1
Salary : US$ 3570 – 4326 / month


The desired candidate must have a minimum of 8 years experience in the following:

1. Monitor daily activities of Chemical and Spectro lab and provide support in quality control of DR plant and SMP
2. Arrange and order required consumable Spaces for smooth operation of laboratories
3. Arrange staff in groups to man the laboratories for 24 hrs to serve DRP and SMP requirements & ensure timely reporting of results
4. Maintain equipment in working condition to make available 24 hrs ensure timely reporting of results to DRP and SMP to control the quality
5. Develop and update ISO documents to comply with the company policy
6. Record and report problems faced, break down or damages, spares and, consumables required to his superior to ensure smooth functioning of testing activities

Also, a degree in Science is a must.

128. DRP LABORATORY ASSISTANT



Department : Technical Services
Job Location : Abu Dhabi
No. Of Vacancy : 1
Salary : US$ 1758 – 1983 / month


The desired candidate must have a minimum of 3 years experience in the following:

1. Receive and prepare samples from DRP production every 2 hours (during start up every hour) to control the Quality in DRP

2. Prepare samples from oxide charge, DRI charge to furnace, lime deliveries, Ferro alloys, carbon injection, refractory's, slag etc for chemical analysis by chemists

3. Carry out screen test on DRI, oxide and raw materials to check compliance to ESI specification

4. Carry out tumble test, bulk density, moisture, compression test and screen test on each oxide shipments to check the compliance with ESI specification

5. Carryout daily cleaning and maintenance on jaw crushers, ball mill, screen shaker etc to ensure the availability of machines 24 x 7 for DRP

6. Record and report problems faced, break down or damages, spares & consumables required to his superior to ensure smooth functioning of sample preparation machines

Also, undergraduate or diploma in chemistry or chemical engineering is a must.

129. MECH & METALLURGICAL TESTING LAB SUPERVISOR

Department : Technical Services
Job Location : Abu Dhabi
No. Of Vacancy : 1
Salary : US$ 3570 - 4326 / month



The desired candidate must have a minimum of 8 years experience in the following:

1. Monitor daily activities of mechanical / Metalurgical testing laboratories
2. Arrange staff in groups to man the laboratories for 24 hrs to serve Rolling Mills
3. Maintain equipment in working condition to make available 24 hrs ensure timely reporting of results to Rolling Mills
4. Arrange and order required consumable Spaces for smooth operation of laboratories
5. Record and report problems faced, break down or damages, spares and, consumables required to his superior to ensure smooth functioning of testing activities
6. Develop and update ISO documents to comply with the company policy



Also, undergraduate or diploma in chemistry or chemical engineering is a must.

130. MECH & METALLURGICAL TESTING LAB TECHNICIAN


Reference Code : TS-MMTLabTech
Department : Technical Services
Job Location : Abu Dhabi
No. Of Vacancy : 4
Salary : US$ 3158 – 3355 / month



The desired candidate must have a minimum of 5 years experience in the following:

1. Perform and record tests on production samples from each cast to ensure compliance to the related specification

2. Monitor and inform any surface abnormalities, yield and tensile values on the samples to mill and QC inspector to ensure follow up and corrective action

3. Store each cast mechanical test results in Sap to enable printing of test certificates to customers

4. Carry out non routine tests for samples from mills, QC. To enable inspector to make decision on held bundles

5. Preserve the samples in case of any lap opening in bend test, bad steel and similar problems for inspection by Dept. Manager to take corrective measures

6. Carryout routine Maintenance on testing and measuring equipment

7. Record and report problems faced, break down or damages, spares and consumables required to his superior to ensure smooth functioning of testing activities


Also, undergraduate or diploma in chemistry or chemical engineering is a must.

If you feel you are match with above positions, you are welcome to logon to http://career. esi-steel. com to apply your cv by yourself.

For more info's, please call us or click http://www.totaldat a.co.id/jobsite_ abudhabi. htm:

PT. Totaldata Persada

021-8477689, 021-84994728. Attn.: Ms. Puput/Mrs. Dini


Thanks Mr. Admin.